-
需要控制320*240的lcd的朋友可以看看，非常实用
需要控制320*240的lcd的朋友可以看看，非常实用-Need to control 320* 240
- 2022-05-24 10:09:50下载
- 积分：1
-
/// ////差动输入，定时启动，由T2定时////////////////
/////////选择6，7通道为ADC0差动转化通道,其中第6通道为P3....
/// ////差动输入，定时启动，由T2定时////////////////
/////////选择6，7通道为ADC0差动转化通道,其中第6通道为P3.6,第7通道为P.7-/////// Differential input, time to start, from time to time T2 ///////////////////////// choose 6,7 for ADC0 channel difference Dynamic conversion channel, the first of which for the 6-channel P3.6, No. 7 channel for P.7
- 2022-03-15 04:03:17下载
- 积分：1
-
keyboard testing procedures, including, to jitter, scanning, detection, (8051 or...
键盘测试程序，包括显示 、去抖动、扫描、检测，（8051或8031）-keyboard testing procedures, including, to jitter, scanning, detection, (8051 or 8031)
- 2022-05-14 15:30:39下载
- 积分：1
-
430 single
430单片机的程序设计是使用汇编语言，此代码实现的是基本的查询功能-430 single-chip design is the use of procedures in assembly language, this code is the basic query functionality
- 2023-08-11 00:55:03下载
- 积分：1
-
l298调 速 程 序 常规的接法是这样的，EnableA接PWM信号，Input1输入正反控制信号， Input2是Input1经过反相以后的信号。L298的...
l298调 速 程 序 常规的接法是这样的，EnableA接PWM信号，Input1输入正反控制信号， Input2是Input1经过反相以后的信号。L298的电平是与TTL电路相兼容的，一般是超过2.5V就为高电平。假如Input1为高电平时电机正转，那么低电平时就是反转，PWM信号控制电机的转速。
_________________
-l298 procedures conventional speed connection that is the case, EnableA then PWM signal, Input1 input positive and negative control signals, Input2 is Input1 through after RP signal. L298 level is compatible with TTL circuits, and is generally more than 2.5V for the high. If Input1 is high when the motor is transferred, then that is when low-level inversion, PWM signal to control motor speed. _________________
- 2022-06-18 18:51:26下载
- 积分：1
-
lcd多级菜单实现，转摘！
lcd多级菜单实现，转摘！-LCD achieve multi-level menu, journals!
- 2022-01-30 14:21:27下载
- 积分：1
-
M16的直流电机
用m16驱动的l298n直流电机转向程序，很好用，-M16 with DC motor-driven steering l298n procedures, very good, and
- 2023-01-01 08:30:05下载
- 积分：1
-
名称：8 * 8点
名称：8*8点阵显示
公司：上海浩豚电子科技有限公司
编写：师访
日期：2009.5
修改：无
内容：和数码管显示方式相同，这里使用P0口和P2口-Name: 8* 8 dot-matrix display Company: Shanghai Electronic Technology Co., Ltd. Hao dolphin prepared: Teachers Visit Date: 2009.5 Review: No content: and digital tube display the same way, where the use of P0 and P2 port port
- 2023-08-30 13:10:03下载
- 积分：1
-
KeilC51开发,51单片机与E2PROM的接口程序,并且有串口与液晶的输出....
KeilC51开发,51单片机与E2PROM的接口程序,并且有串口与液晶的输出.-KeilC51 development, SCM and 51 E2PROM interface procedures, and a serial port with LCD output.
- 2022-07-06 10:05:10下载
- 积分：1
-
单片机是52的，P0口连到四个数码管的七个管脚，其中两个冒号点为最后两个数码管的DOP点，P1.0至P1.3为四个数码管的选通端，低电平有效。程序2较完整，可实...
单片机是52的，P0口连到四个数码管的七个管脚，其中两个冒号点为最后两个数码管的DOP点，P1.0至P1.3为四个数码管的选通端，低电平有效。程序2较完整，可实现设定时间功能。-Singlechip is 52, P0 port connected to four of the seven-pin digital tube, two of which point to the last two colon tube DOP-point digital, P1.0 to P1.3 for the election of four digital tube pass-side, active-low. 2 a more complete procedure, set the time function can be realized.
- 2023-03-31 17:50:03下载
- 积分：1
