-
SD卡读写程序
1. sdconfig.h: 该文件为SD卡读写模块配置头文件，用户可根据实际硬件条件进行修改.
2. SD目录: SD卡读写模块的全部...
SD卡读写程序
1. sdconfig.h: 该文件为SD卡读写模块配置头文件，用户可根据实际硬件条件进行修改.
2. SD目录: SD卡读写模块的全部文件,一般不用修改.
3. 建议sdconfig.h文件不要放于SD目录中，因为SD目录中的文件一般无须修改,
而sdconfig.h通常会有改动.-1. Sdconfig.h: The document for the SD card reader module configuration header files, the user hardware according to actual conditions can be modified. 2. SD directory: SD card reader module of all the documents, the general need not be amended. 3. Proposed sdconfig. h files directory should not be put in SD because SD files in the directory are not normally required to be amended and the changes are usually sdconfig.h.
- 2022-01-26 02:34:36下载
- 积分：1
-
设计使得原本需要14个IO接口的键盘显示少用了9个单片机IO接口,虽然该设计的优势在本实验中没有完全体现出来,但若在现代工业设计中应用此方案,在对引脚需要较大的...
设计使得原本需要14个IO接口的键盘显示少用了9个单片机IO接口,虽然该设计的优势在本实验中没有完全体现出来,但若在现代工业设计中应用此方案,在对引脚需要较大的产品中其优点将体现得淋漓尽致。.-Design makes the original needs 14 IO interface shows the use of a keyboard 9 Singlechip IO interface, although the advantages of the design in this experiment did not fully reflected, but in modern industrial design in the application of this program in the pairs of primers Products feet larger in its merits and will be reflected most vividly. .
- 2023-05-31 14:15:02下载
- 积分：1
-
p18f452液晶控制驱动程序，C语言实现
p18f452液晶控制驱动程序，C语言实现-p18f452 LCD control driver, C language
- 2022-03-26 18:57:41下载
- 积分：1
-
Keil C51软件模拟I2C基于主线
keil c51下基于软件模拟I2C总线的Dll动态连接库。下载后将其烤到keilC51in下即可。-keil c51 simulates I2C based on software the main line the
Dll dynamic connection storehouse. After downloading roasts it to
keilC51in under then.
- 2022-12-01 13:15:08下载
- 积分：1
-
单
单片机系统上电后，P0 口和 P1 口都被清 0。然后，你规定一个由 6 个数字构成的序列（每个数字从 0～F 中选取），比如 E、8、9、0、7、F。然后每次当单片机检测到外部中断 0发起中断时间时，读取 P0 口和 P1 口上的状态值，当连续 6 次外部中断事件的对应的数字序列构成你所设定的序列后（举例来说，如果 P0.0 是 1，P0 和 P1 的其他管脚是 0，那么我们称为检测到一次数字 0），从串口打印输出一幅类似下图的 16×16 的ASCII码的圣诞树图片。-Single-chip microcomputer system after power, P0 and P1 mouth I have been ching 0. Then you set a six figure constituted by the sequence (each number from 0 ~ F in selected), for example, E, 8,9,0,7, F. And then each time a single-chip detects external interrupt 0 initiated interruption time, I read the P0 and P1 mouth on the state value, when a row 6 times the corresponding external interrupt events constitute digital sequence set your sequence (for example example, if P0.0 is 1, P0 and P1 of the other pin is 0, then we called a number of detected 0), a printout from the serial port under similar 16 × 16 map of the ASCII code of the Christmas tree图片.
- 2022-10-23 01:15:03下载
- 积分：1
-
自己写的测试串口的小工具，巨好用！他可以完成十六进制和字符同时显示...
自己写的测试串口的小工具，巨好用！他可以完成十六进制和字符同时显示-himself wrote the serial testing of small tools, giant handy! He can be completed hexadecimal characters and shows
- 2022-01-26 20:00:06下载
- 积分：1
-
SCM c Language Program
单片机c语言程序--8279芯片4X4键盘控制程序，输出按键字符-SCM c Language Program-- 8279 chip 4x4 keyboard control procedures, the output key characters
- 2022-02-22 08:34:08下载
- 积分：1
-
GCC complete the procedure of SD card! May need to change according to their own...
GCC的SD卡完整程序！可根据自己需要更改！-GCC complete the procedure of SD card! May need to change according to their own!
- 2023-07-15 17:30:04下载
- 积分：1
-
芯片使用51+ch375,程序用180行C代码就能够读取FAT16文件系统U盘的根目录,可以看到根目录下的文件名,并可显示首文件内容...
芯片使用51+ch375,程序用180行C代码就能够读取FAT16文件系统U盘的根目录,可以看到根目录下的文件名,并可显示首文件内容-chips use 51 ch375, procedures using 180 OK C code can read FAT16 file system drives the root directory, we can see the root directory under the file name, would show the contents of the documents first
- 2023-08-26 21:40:04下载
- 积分：1
-
Examples of procedures for CC2430 Wireless Dragon
基于CC2430的无线龙的例子程序，应用缩减版的2004协议-Examples of procedures for CC2430 Wireless Dragon
- 2022-04-15 12:26:48下载
- 积分：1
