-
Is the sd card
是对sd卡驱动的分析以及读写分析寄存器配置-Is the sd card-driven analysis and analysis of reading and writing configuration registers
- 2022-07-23 10:07:39下载
- 积分：1
-
D/A7513可以用于调试
1602显示器
D/A7513可以用于调试
1602显示器-D/A7513 display 1602 can be used to debug
- 2022-07-01 03:41:55下载
- 积分：1
-
一个320*240的液晶的C51驱动，程序不光可以用在51单片机上，还可以应用在其他单片机上，已成功移植到MSP430，移植时只需要重新改下引脚定义...
一个320*240的液晶的C51驱动，程序不光可以用在51单片机上，还可以应用在其他单片机上，已成功移植到MSP430，移植时只需要重新改下引脚定义-A 320* 240 LCD drive the C51, the program not only can be used in single-chip microcomputer 51, but also can be applied to other single-chip, this has been successfully transplanted into MSP430, transplantation need to change only the definition of under-pin
- 2022-02-16 00:58:34下载
- 积分：1
-
此程序时周立功ZLG7290源码驱动，这是我开发版上的源码
此程序时周立功ZLG7290源码驱动，这是我开发版上的源码-This program Ligong weeks ZLG7290 source driver, this is my development version of the source
- 2022-01-25 20:16:48下载
- 积分：1
-
This procedure is based on the avr SCM atmega48 control 16* 4:00 LCD. Main docum...
本程序是基于avr单片机的atmega48的控制16*4点阵型液晶。其中main文件调用LCD.c和LCD.h文件。用户可以直接把工程中的LCD.c和LCD.h文件放到自己的程序目录下即可。-This procedure is based on the avr SCM atmega48 control 16* 4:00 LCD. Main document which calls LCD.c and LCD.h document. Users can directly to the project document LCD.c and LCD.h procedures on their own directory can be.
- 2022-03-04 05:08:19下载
- 积分：1
-
AVR atmega micro os:avrx.
AVR atmega micro os:avrx.
- 2023-09-03 22:50:04下载
- 积分：1
-
upsd3300_I2C.c upsd3300_lcd.c so on several practical way Order code
upsd3300_I2C.c
upsd3300_lcd.c
等等几个实用的程序代码-upsd3300_I2C.c upsd3300_lcd.c so on several practical way Order code
- 2023-06-21 09:25:03下载
- 积分：1
-
51单片机Ｃ语言学习杂记 51单片机Ｃ语言学习杂记
51单片机Ｃ语言学习杂记 51单片机Ｃ语言学习杂记-51 Single-chip C Language Learning 51 Miscellanies Miscellanies Singlechip C Language Learning
- 2023-08-01 23:30:03下载
- 积分：1
-
简单实用的51串口波特率计算器。
简单实用的51串口波特率计算器。- Simple practical 51 string mouths baud rate calculator.
- 2023-03-19 13:40:03下载
- 积分：1
-
system can address 550 for the test system can, Application T0 1s to every timer...
系统can地址为550,用于can系统测试,应用T0定时器每隔1s向can总线发送一组数据:数据长度为8个字节,
首字节为05H,第二个字节为累加变量,每秒钟数值增加1,-system can address 550 for the test system can, Application T0 1s to every timer can send a bus of data : data length of 8 bytes the first byte of 05H, the second byte of cumulative variable, an increase in value per second.
- 2022-02-14 22:03:01下载
- 积分：1
