DS1302的读写程序，经过测试的程序 欢迎大家拿去 我们进行交流和学习探讨-The DS1302 to read and write procedures, tested the procedures are welcome to take us to explore the exchange and learning

这是基于温度采集的报警系统 是利用MSP430 单片机实现控制-This based on the collection of temperature alarm system is the use of MSP430 MCU control

家用消毒柜 家用消毒柜-Home home disinfection disinfector disinfecting cabinet home cabinet

是一个关于速度开环控制的空间矢量交流调速程序-a c programe for an open loop AC motor speed control. Method: space vector pulse width module

keil和proteus联调实例-闪灯程序,希望对大家学习单片机有用.-keil and proteus FBI examples- flashing process, everyone would like to study single-chip useful.

STM32 开发板例子:外部中断. 开发环境:Keil For ARM-STM32 development board example: external interrupt. Development Environment: Keil For ARM

在MSP430下操作IC卡以及FLASH以及ADS1242-operate under the MSP430 IC cards and FLASH and ADS1242

俄罗斯方块，采用51单片机，c语言编制。能在大屏幕液晶下很好的玩转游戏。-Russian box, using 51 single-chip microcomputer, c language. Large-screen LCD in the next game Topsy good.

PWM 控制电机文档及源代码-PWM motor control documentation and source code

红外遥控接收 ORG 0000H LJMP START 转入主程序 ORG 0010H START: MAIN: JNB P2.2,IR LJMP MAIN 以下为进入P3.2脚外部中断子程序，也就是解码程序 IR: MOV R6,#9 SB: ACALL DELAY882 调用882微秒延时子程序 JB P2.2,EXIT 延时882微秒后判断P3.2脚是否出现高电平如果有就退出解码程序 DJNZ R6, SB 重复10次，目的是检测在8820微秒内如果出现高电-infrared remote control receiver ORG 0000H LJMP START into main program ORG 0010H START : MAIN : JNB P2.2, IR LJMP MAIN below to enter P3.2 foot external interrupt subroutine, which is decoding procedures IR : MOV R6, SB# 9 : Calling ACALL DELAY882 882 microsecond delay subroutine JB P2.2, EXIT 882 microsecond delay after the judgment whether there P3.2 feet to I quit if decoding procedures DJNZ R6, SB repeated 10 times, the purpose is to test if within 8,820 microsecond high