-
PIC网卡控制器ENC28J60的PIC单片机程序源代码（c）
PIC网卡控制器ENC28J60的PIC单片机程序源代码（c）-PIC ENC28J60 Ethernet controller to the PIC procedure code (c)
- 2022-01-30 21:29:58下载
- 积分：1
-
Nios II study on good information, it is suitable for beginners
一些关于Nios II学习的好资料，很适合初学者-Nios II study on good information, it is suitable for beginners
- 2023-05-14 16:45:03下载
- 积分：1
-
D12 USB设备控制芯片驱动程序代码，是学习USB设备驱动编程的好资料...
D12 USB设备控制芯片驱动程序代码，是学习USB设备驱动编程的好资料-D12 USB device controller driver code, is a USB device driver programming learning good information
- 2022-01-28 08:13:07下载
- 积分：1
-
基于RSSI的zigbee定位
基于RSSI的zigbee定位，通过多种算法和经验模型，多点定位，精度还不错。在cc2431平台上实现，可供参考和移植。
- 2022-08-03 14:28:34下载
- 积分：1
-
CENTER transplant experience, very good, very written purposes, the use CENTER f...
ucos移植心得，非常好，写得很有用途，使用ucos的朋友应该要好好的看看，会学到很多东西的。-CENTER transplant experience, very good, very written purposes, the use CENTER friends should look at the good will learn a lot of things.
- 2022-01-25 16:27:23下载
- 积分：1
-
华恒教育关于嵌入式环境构建的
相关况,以及相关的安装说明...
华恒教育关于嵌入式环境构建的
相关况,以及相关的安装说明
-华恒education built on the embedded environment-related conditions, as well as related installation instructions
- 2022-03-17 04:58:28下载
- 积分：1
-
10分钟学会PLD,仿真，下载，原理图，布线
10分钟学会PLD,仿真，下载，原理图，布线-10 minutes Society PLD, simulation, download, schematics, wiring
- 2022-01-22 14:16:46下载
- 积分：1
-
This procedure to achieve with digital control to display sent by the computer s...
本程序实现用数码管来显示由电脑串口发来的数据。-This procedure to achieve with digital control to display sent by the computer serial port data.
- 2022-05-30 01:48:07下载
- 积分：1
-
FS9315核心板和底板原理图，PDF格式，学习9315的同志可参考
FS9315核心板和底板原理图，PDF格式，学习9315的同志可参考-FS9315 core board and backplane schematic, PDF format, learning comrades 9315 may refer to
- 2022-02-02 10:33:35下载
- 积分：1
-
原创 VB上位机控制LED灯程序
应用背景
VB写的控制程序，通过PC端上位机控制，在电路板上实现相应的演示效果。
VB write control procedures, through the PC side of the upper computer control, on the circuit board to achieve the corresponding demonstration effect.
关键技术首先 烧写程序到单片机 晶振 11.0592MHZ连接好串口线打开上位机软件 选择好COM端口 设置波特率为9600
First of all burn to write programs to chip crystal 11.0592Mhz serial line connection open PC software select the COM port to set the baud rate of 9600
- 2022-08-22 03:06:10下载
- 积分：1
