-
基于LPC2146的USB
基于LPC2146的USB-HID设备程序，一个简易鼠标。-LPC2146 based on the USB-HID device procedures, a simple mouse.
- 2022-02-12 12:16:40下载
- 积分：1
-
Pocket PC系统开发程序，
1、可实现重启系统
2、获取系统内部的基本信息
3、使喇叭发出固定频率的声音...
Pocket PC系统开发程序，
1、可实现重启系统
2、获取系统内部的基本信息
3、使喇叭发出固定频率的声音-Pocket PC system development process, one can realize reboot the system 2, to obtain basic information system 3, so that the issue of fixed-frequency speaker
- 2023-09-01 17:20:02下载
- 积分：1
-
U-Boot在44B0X开发板上的移植以及代码分析.asm-U-Boot board in the development of transplant and 44B0X code analysis. Asm
- 2023-03-14 13:55:03下载
- 积分：1
-
延迟网络协议
基于Contiki OS的基础上，构建一个延迟网络协议，在移动网络中，经过多跳可以到达目的地（参考SPRAY AND WAIT 算法）
- 2023-01-09 12:20:04下载
- 积分：1
-
配置文件读写
c语言编写的配置文件读取程序，支持特定格式 读写，就这样了 还写啥 有啥好写的。字数够了吗？！
- 2022-01-28 01:19:18下载
- 积分：1
-
该程序是一次又一次的操作环境，即“文本接口”…
该程序uc/gui 是再linux(文本界面)环境下运行,需要用到/dev/fb,该版本和uc-GUI 3.24版源码（含VC下的示例程序)都是同一版本,只是运行环境不一样.
-the program uc/gui is again linux (text interface) operating environment, the need to resort to/dev/fb, the version and uc-source GUI version 3.24 (including the VC sample program) is the same version, the operating environment is not the same.
- 2022-07-24 21:42:21下载
- 积分：1
-
3D打印机 marlin
应用背景The leading developers of Marlin are currently (January 2015) EvdZ and bkubicek, though many others contribute with their patches. This is a firmware for reprap single-processor electronics setups. It also works on the Ultimaker PCB. It supports printing from SD card+Folders, and look-ahead trajectory planning. This work is licensed under the GNU GPL v3 or (at the user"s discretion) any later version. It is based on Sprinter firmware, which was licensed under GPL v2 or later.关键技术
Features:
Interrupt based movement with real linear acceleration.
High steprate.
Look ahead (Keep the speed high when possible. High cornering speed).
Interrupt based temperature protection.
preliminary sup
- 2022-03-06 02:29:58下载
- 积分：1
-
Modbus RTU从站项目基于PIC单片机16f87x处理器和24LC128 CMO…
Modbus RTU Slave project based on Microchip PIC 16F87X processor and 24LC128 CMOS Serial EEPROM with I2C interface.
PIC Modbus RTU slave supports write and read (3 and 16) functions. The data is stored and read from EEPROM via the I2C bus. You can write/read up to 8000 registers.
In a single frame can be read/write 32 registers .
The program was written in the HI-TECH C compiler-Modbus RTU Slave project based on Microchip PIC 16F87X processor and 24LC128 CMOS Serial EEPROM with I2C interface.
PIC Modbus RTU slave supports write and read (3 and 16) functions. The data is stored and read from EEPROM via the I2C bus. You can write/read up to 8000 registers.
In a single frame can be read/write 32 registers .
The program was written in the HI-TECH C compiler
- 2022-03-12 18:16:20下载
- 积分：1
-
测试DaVinci平台硬件RTC的linux端程序
测试DaVinci平台硬件RTC的linux端程序
- 2022-02-20 22:07:56下载
- 积分：1
-
一本不错的数字图像处理书（冈萨雷斯中文版）总共有三个压缩文件需要放在一起解压缩...
一本不错的数字图像处理书（冈萨雷斯中文版）总共有三个压缩文件需要放在一起解压缩-A good digital image processing book (Gonzalez Chinese version) a total of three files need to be extracted with
- 2023-05-09 13:45:04下载
- 积分：1
