-
uart
实现与电脑端串行数据发送与接收，波特率为9600(Realize serial data sending and receiving with the computer terminal)
- 2017-10-04 01:30:01下载
- 积分：1
-
FSM
It is the FSM implemented in Xylinx 14.7 on FPGA
- 2015-09-28 15:50:09下载
- 积分：1
-
jk
说明： 基于quartus2的jk触发器设计，内含源码和仿真图(Jk flip-flop design based on the quartus2, containing source code and simulation diagram)
- 2011-11-24 10:47:56下载
- 积分：1
-
ug948-design-files
Xilinx Sysgen User Guide
- 2018-10-14 21:54:22下载
- 积分：1
-
fft
FPGA实现FFT算法的源代码及工程文件，此工程为ISE工程项目。有详细的说明，可以运行。(FPGA Implementation of FFT algorithm source code and project files, this works for the ISE project. There are detailed instructions, you can run.)
- 2013-10-12 17:21:32下载
- 积分：1
-
UART_CESHI
基于VHDL语言的串口发送和接收程序,自己调试通过，并已经运用在工程中(Based on the serial port to send and receive procedures VHDL language, its own debugging, and has been used in the project)
- 2016-08-05 15:27:54下载
- 积分：1
-
verilog
一些简单的Verilog代码，小例程，比如求平均值、七段数码管等等(Some simple Verilog code, small routines, such as averaging, seven digital tubes and so on)
- 2016-12-12 10:02:20下载
- 积分：1
-
CLZ32
针对32位MIPS微处理器中CLZ指令（对单个字高位连零进行计数）的实现电路，使用了类似于超前进位的逻辑结构。包含测试文档，以及Design
Compile所用的环境和脚本。(The CLZ instruction counts the number of leading zeros in a word. The 32-bit word in the GPR rs is scanned from most-significant to least-significant bit.The number of leading zeros is counted and the result is written to the GPR rd. If
all 32 bits are cleared in the GPR rs, the result written to the GPR rd is 32. )
- 2021-03-31 19:39:08下载
- 积分：1
-
Electronicorgan
利用VHDL编写的电子琴发生器，以简单的演奏电路论文(Electronic organ prepared using VHDL generator to perform a simple circuit Papers)
- 2009-03-06 08:52:10下载
- 积分：1
-
master_slave
说明： AXI4-Lite总线的主从机读写，例程及代码(AXI4-Lite Bus Host-Slave Read-Write, Routine and Code)
- 2019-03-22 22:24:20下载
- 积分：1
