-
基于ucos的可移植的键盘程序。包含了四种键盘状态，按下，弹起，按下未弹起，重复。软件去抖的功能。...
基于ucos的可移植的键盘程序。包含了四种键盘状态，按下，弹起，按下未弹起，重复。软件去抖的功能。-Based on the ucos procedures portable keyboard. Status includes four keyboard, press, up, did not press up, repeat. Software functions to tremble.
- 2022-01-27 11:23:28下载
- 积分：1
-
modbus_s3c2410
modbus_lpc2294
Modbus协议主从协议栈，基于S3C2410和LPC2294两种平台案例-modbus_s3c2410
modbus_lpc2294
- 2022-03-05 22:21:13下载
- 积分：1
-
LPC2300 Network Driver KSZ8041NL
LPC2300 网络驱动 KSZ8041NL-LPC2300 Network Driver KSZ8041NL
- 2022-04-01 16:40:28下载
- 积分：1
-
STM32F103C8T6_UCOS_DEMO
说明： 这是按照前面我发的从零开始学习ucosii手册，编写成功的模板。芯片是stm32f103c8t6，移植在f103芯片上，都是同理可得。记住虽然可以直接拿着用，但是要修改对应的IO口哦，程序效果是led小灯闪烁。（有一个问题我也不太清楚，理论上c8t6的启动文件应该是startup_stm32f10x_md.s，但是用它却不能成功。用startup_stm32f10x_hd.s却成功了。）(This is a successful template written in front of the uCOSII manual that I started from zero. The chip is stm32f103c8t6, and the transplant is on the F103 chip. Remember that although it can be used directly, but to modify the corresponding IO mouth Oh, the program effect is the LED light flicker. (there is one problem I'm not very clear about. In theory, c8t6's startup file should be startup_stm32f10x_md.s, but it can't be successful with it. It was successful with startup_stm32f10x_hd.s.))
- 2018-02-03 15:40:42下载
- 积分：1
-
uCOSIIv2.80_For_GBA
uCOSII v2.80
- 2006-04-08 10:12:46下载
- 积分：1
-
该代码实现LPC2132平台下的超声波测距功能
该代码实现LPC2132平台下的超声波测距功能-Realize the code LPC2132 platform features Ultrasonic Ranging
- 2022-07-10 08:12:12下载
- 积分：1
-
lpc2478sample. very good lpc2478sample. a very good explanation of routine clear
lpc2478sample.非常不错
lpc2478sample.非常不错
例程的解释清晰-lpc2478sample. very good lpc2478sample. a very good explanation of routine clear
- 2022-08-23 06:09:29下载
- 积分：1
-
uCOS for S3C44B0x
ucosii移植到s3c44b0的源代码(-The source code for port Ucosii transplants to the s3c44b0 )
- 2004-04-29 08:09:21下载
- 积分：1
-
我移植了加州大学
我 Porting 的 uC/OS-II V2.84 (目前Micrium)最新版之 Keil C51 工程,专供给 8051 上做任务调度,我已将 Code Size 改小至 4000 Byte,对于 X-Ram 的用量也仅 160 Byte(于 Keil C51 V8.08a 下编译后).我在 Main.c 内创建了两个任务调度的 LED 闪烁程序,方便了解任务是如何被创建的,同时我也在 Keil C51 的 Project 内设好了 Simulator 模式及 Port 1 窗视可即时的观测这两个任务调度情况.-I Porting the uC/OS-II V2.84 (currently Micrium) the latest version of the Keil C51 works exclusively on the supply of 8051 to do mission scheduling, I have Code Size改小to 4000 Byte, the usage of X-Ram is only 160 Byte (in Keil C51 V8.08a compiled). I main.c create two task scheduling of the LED flashing procedures to facilitate the understanding of how the mission was founded at the same time I Keil C51 is also equipped with the Project Good the Simulator Mode and Port 1 window, as can be observed real-time task scheduling of these two cases.
- 2022-07-08 00:39:37下载
- 积分：1
-
ucos
uCOS-II 2.52在intel 80x86上的移植程序(大模式,实模式）-uCOS-II 2.52 intel 80x86 in the transplant procedure (large model, real mode)
- 2022-02-04 03:12:45下载
- 积分：1
