PDA上的CF CARD 文件系统的建立程式-PDA CARD CF File System to establish programs

St7920串口驱动12864 KeilV51很实用

avr单片机1wire例子代码-avr SCM 1wire example code

智能车测速程序 智能车测速程序-Freescale cesu

c8051f的IIC读取eeprom,有很好的程序结构，具有通用性，经修改后能用在任何单片机中的IIC操作中-c8051f eeprom read the IIC, a very good program structure is universal, , as amended, can be used in any single-chip-IIC operation

BTF020实验程序-1 btf020开发板自带-Experimental procedures BTF020 development board comes with-1 btf020

由于arm板的键盘扫描程序，c语言编写。-As the arm board keyboard scanner, c language.

基于51单片机的电压调节系统，可以实时显示电压值。用keil开发环境，protuse仿真。-Based on 51 single-chip voltage regulation system that can display real-time voltage value. Keil development environment with, protuse simulation.

LT_1B msp430开发板例子程序－HFXT

With the program AD9854C.exe one can set and tune the frequency in CW-mode. For use as a receiver LO also IF can be given and the both possible receiving frequencies are printed on the screen. The level in Q-outputs can be varied by giving the wanted attenuation in dB. This function is done by controlling a 12b digital multiplier in the device. In this case the level decreases somewhat with increasing frequency as it does in DDS devices. Alternatively the inverse sinc correction can be chosen, in which case the output is flat and high. -With the program AD9854C.exe one can set and tune the frequency in CW-mode. For use as a receiver LO also IF can be given and the both possible receiving frequencies are printed on the screen. The level in Q-outputs can be varied by giving the wanted attenuation in dB. This function is done by controlling a 12b digital multiplier in the device. In this case the level decreases somewhat with increasing frequency as it does in DDS devices. Alternatively t