登录
首页 » 嵌入式芯片 » SJF2440 S3C2440 is the use of JTAG FLASH burning tools Although slow, but steady...

SJF2440 S3C2440 is the use of JTAG FLASH burning tools Although slow, but steady...

于 2022-12-09 发布 文件大小:80.09 kB
0 114
下载积分: 2 下载次数: 1

代码说明:

SJF2440是S3C2440使用JTAG的FLASH烧写工具,虽然速度慢,但比较稳定。这个是源码,可以参考一下JTAG的操作原理,使用VC编译。-SJF2440 S3C2440 is the use of JTAG FLASH burning tools Although slow, but steady. This is the source code can refer to the JTAG operating principle, the use of VC compiler.

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • DMA introduction/fundamentals
    DMA introduction/fundamentals
    2022-01-26 03:15:47下载
    积分:1
  • 一个UCOS
    一个uCOS-II下的tcpip协议栈实现,可用于嵌入式系统的网络应用开发-a uCOS-II under the TCPIP stack, which could be used in embedded system development of network applications
    2022-02-10 04:10:07下载
    积分:1
  • 本源码是基于SPI的八段数码管,开发工具是CodeWarrior for ARM Developer Suite即ADS...
    本源码是基于SPI的八段数码管,开发工具是CodeWarrior for ARM Developer Suite即ADS-The source is based on the SPI of the eight digital tube, development tools are CodeWarrior for ARM Developer Suite that ADS
    2022-01-22 04:27:29下载
    积分:1
  • his project was built and tested with WinAVR
    his project was built and tested with WinAVR-20060125. Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!! To build the code, just install WinAVR and run "make" from the console in echomaster and echoslave subdirs. "make program" will program the device if you have a AVRISP attached. Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST! Otherwise you wont get any clock signal to the AVR and then you can t program it or reset the fuses! The MC1319x has default clock output of 32kHz so you will have to set your programmer to a very low frequency (
    2023-02-22 21:55:03下载
    积分:1
  • 用DSP实现对4*4LED的控制程序,本程序已经在TMS320F2812上调试成功。...
    用DSP实现对4*4LED的控制程序,本程序已经在TMS320F2812上调试成功。-Using DSP to realize the 4* 4LED control procedures, the procedures have been successful in TMS320F2812 debugging.
    2023-05-21 01:40:04下载
    积分:1
  • //*
    //*--- --- --- --- --- --- --- --- --- --- --- --- ---- //* File Name : main.c //* Object : main application written in C //* Creation : FB 24/00/2002 //* //*-//*---------------------------------------------------------------------------- //* File Name : main.c //* Object : main application written in C //* Creation : FB 24/00/2002 //* //*----------------------------------------------------------------------------
    2023-03-10 09:45:04下载
    积分:1
  • 我自己写的在ARM 44B0上能跑通的LCD display 程序
    我自己写的在ARM 44B0上能跑通的LCD display 程序-I wrote it myself in the ARM-44B0 able to run on the LCD display procedures
    2022-02-26 20:00:10下载
    积分:1
  • ARM9的触摸屏程序实现液晶显示触摸屏功能…
    ARM9 的触摸屏的程序,实现液晶显示 触摸屏的功能-ARM9 Touch Screen procedures realize liquid crystal display touch screen function
    2022-03-06 11:37:22下载
    积分:1
  • S3C2410,MDK以下常规实验RFID可以通过服务实现…
    s3c2410,MDK下面RFID例程实验,可以实现通过串口读取RFID卡ID号并显示出来。-s3c2410, MDK following routine experimental RFID can be achieved through the serial port to read RFID card ID number and displayed.
    2022-03-21 12:53:59下载
    积分:1
  • 关于arm的几篇文章。。大家分享
    关于arm的几篇文章。。大家分享-arm of the articles. . Share
    2022-04-06 23:58:17下载
    积分:1
  • 696518资源总数
  • 105877会员总数
  • 14今日下载