登录
首页 » 嵌入式系统 » This program from the MCU to control two

This program from the MCU to control two

于 2023-01-08 发布 文件大小:4.38 kB
0 86
下载积分: 2 下载次数: 1

代码说明:

本程序由单片机的两定时器去控制蜂鸣器的鸣叫。-This program from the MCU to control two-timer buzzer to tweet.

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • 一个开源的linux video摄像头程序
    一个开源的linux video摄像头程序-an open-source Linux video camera procedures
    2022-11-16 12:55:03下载
    积分:1
  • fdsdfdsddddddddddddddddd
    fgfdgdffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffgfdgdffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffgfdgdffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffgfdgdffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffgfdgdffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffgfdgdffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffgfdgdffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffgfdgdffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffgfdgdffffffffffffffffffffffffff
    2022-03-15 03:44:00下载
    积分:1
  • 经过修改的在uClinux2.6上正常运行的ralink rt2571芯片组的设备驱动程序....
    经过修改的在uClinux2.6上正常运行的ralink rt2571芯片组的设备驱动程序.-revised uClinux2.6 on the normal operation of the chip ralink rt2571 The device driver.
    2022-01-31 04:18:33下载
    积分:1
  • asterisk-g72x-1.1.tar.bz2
    经过定点优化的G723、G729的codec In case you do not want to install IPP, then you"ll get twice better performance out of ITU-T code if you build it with GCC 4.5 or Intel CC with LTO/IPO enabled. Still, even with ICC, it is 10x slower than IPP - 30ms vs 3ms of processor time to encode one second of G.729 audio on modern hardware. G.723 is around 100ms. GCC with LTO is 2x slower than ICC. For ITU-T code, a Core2 class processor is recommended.
    2022-01-30 16:18:30下载
    积分:1
  • 发电CPLD列的前一个
    发电CPLD家族的前十分之一MAXⅡ器件动态功耗很低,所以低功耗运行。MAX II系列价格低廉,功耗是MAX 3000A系列的十分之一。
    2022-11-07 06:05:04下载
    积分:1
  • 《ARMLinux设备驱动实例开发》,第二章代码,按键驱动开发...
    《ARM嵌入式Linux设备驱动实例开发》,第二章代码,按键驱动开发-" ARM embedded Linux device driver development examples" chapter code, key-driven development
    2023-06-08 18:35:03下载
    积分:1
  • 使用该控制器通用I / O端口I2C协议仿真源代码,第…
    利用msp430的通用I/O端口模拟I2c协议的源代码,利用此代码可以不需要I2c模块即可进行I2C通信-use of the Controller General I/O Ports I2c agreement simulation source code, the use of this code can not I2c module can hold I2C communications
    2022-09-08 14:55:03下载
    积分:1
  • 基于msp430f169和3.2寸彩屏ssd1289的贪吃蛇和俄罗斯方块
    基于msp430f169和3.2寸彩屏ssd1289的贪吃蛇和俄罗斯方块,“锦电杯”电子设计大赛车载预警防撞系统,附带的两个游戏,通过手机蓝牙控制。或者用电脑串口也可以。。。。。
    2023-03-02 22:35:04下载
    积分:1
  • 通过提升机械传动轴的转角脉冲计数,将计数值与预置值作对比,即可确定驱动电机的启停升降,达到平层就位的目的.以AT89C51为CPU,在中断处理程序中对外来脉冲计...
    通过提升机械传动轴的转角脉冲计数,将计数值与预置值作对比,即可确定驱动电机的启停升降,达到平层就位的目的.以AT89C51为CPU,在中断处理程序中对外来脉冲计数.-Through enhancing the mechanical shaft angle of the pulse count, will be of value for comparison with preset values, you can determine the start and stop the motor-driven movements, to achieve the purpose of flat layers in place. To AT89C51 for the CPU, interrupt handling procedures in foreign pulse counting.
    2023-02-28 06:35:03下载
    积分:1
  • FPGA应用开发门与典型实例
    FPGA应用开发入门与典型的应用程序,包括源代码,对于初学者来说非常有帮助。
    2022-03-01 08:29:03下载
    积分:1
  • 696518资源总数
  • 105540会员总数
  • 37今日下载