登录
首页 » 嵌入式芯片 » ARM7 chip company STMicroelectronics STR710 startup code for the re

ARM7 chip company STMicroelectronics STR710 startup code for the re

于 2023-03-24 发布 文件大小:51.23 kB
0 122
下载积分: 2 下载次数: 1

代码说明:

意法公司ARM7芯片STR710的启动代码,用于再外部Flash里烧写针对710移植好的Ulinux的文件。-ARM7 chip company STMicroelectronics STR710 startup code for the re-programmer for external Flash-ri 710 transplant Ulinux good document.

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • micetek stall the bootlader source, the use of 44B0 platform is the u
    micetek的bootlader失速源码,使用的是44B0平台的u-boot修订版,欢迎下载。
    2022-03-24 09:27:54下载
    积分:1
  • 在S3C2410上通过对红外多功能口进行配置实现红外收发功能
    在S3C2410上通过对红外多功能口进行配置实现红外收发功能-S3C2410 adopted in the infrared multi-function I realize infrared transceiver configuration function
    2022-06-16 19:34:31下载
    积分:1
  • 在阳初2410开发板移植U
    在阳初2410开发板移植U-Boot1.2.0的详细笔记,本人按照这个笔记在SMDK2410的开发板上通过测试。-In the beginning of 2410 development board yang transplantation of the U-Boot1.2.0 detailed notes, I SMDK2410 according to the notes in the development of on-board to pass the test.
    2022-03-03 06:55:32下载
    积分:1
  • A friendly arm on the circuit schematic and library file, I believe all of you t...
    友善之臂电路原理图和库文件,相信对大家开发2440有很大帮组-A friendly arm on the circuit schematic and library file, I believe all of you to help develop a great group of 2440
    2022-05-08 06:06:20下载
    积分:1
  • 2410在ads1.2下面的iic驱动,对大家作是非常的有用的,
    2410在ads1.2下面的iic驱动,对大家作嵌入式是非常的有用的,
    2022-08-20 02:23:41下载
    积分:1
  • 绝对原创,开源一STM32项目,CAN,UART,Input检测 原创相对高效性能与代码重用平衡思路(缓冲队列加软中断),可直接做工程模板
    1、CAN收发队列   使用内存FIFO缓冲CAN帧,适合大数据量通信;并使用内部软中断处理CAN数据,相当于事件响应,综合应该比查询方式节省不少时间,也应该比OS调度省点时间。Can.C:底层处理,Communi.C:与应用层高相关。 应用层处理流程用函数指针表的方式调用减少代码量及阅读整齐;实现CAN各种错误记录机制。已初步测试,该机制可用。   CAN处理流程:     接收:CAN1_RX0_IRQHandler_Name (void), CAN1_RX1_IRQHandler(void)           接收中断,CAN_QueueWriteQuick()将当前的有效报文压入内存FIFO,压入的数据为整个CAN邮箱数据,所以后续的处理函数可以分辨出完整的数据。 void CAN1_RX0_IRQHandler_Name (void) // CAN1_RX0_IRQHandler_Name { /* FIFO从空状态开始,在接收到第一个有效的报文后,FIFO状态变为挂号_1(pending_1), 硬件相应地把CAN_RFR寄存器的FMP[1:0]设置为’01’(二进制01b)。 软件可以读取FIFO输出邮箱来读出邮箱中的报文,然后通过对CAN_RFR寄存器的RFOM位 设置’1’来释放邮箱,这样FIFO又变为空状态了。如果在释放邮箱的同时, 又收到了一个有效的报文,那么FIFO仍然保留在挂号_1状态,软件可以读取FIFO 输出邮箱来读出新收到的报文。 如果应用程序不释放邮箱,在接收到下一个有效的报文后,FIFO状态变为 挂号_2(pending_2),硬件相应地把FMP[1:0]设置为’10’(二进制10b)。 重复上面的过程,第三个有效的报文把FIFO变为挂号_3状态(FMP[1:0]=11b)。 此时,软件必须对RFOM位设置1来释放邮箱,以便FIFO
    2022-03-21 07:31:29下载
    积分:1
  • S3C2410的bootloader的nano2410 V2
    s3c2410 bootloader for nano2410 v2
    2022-07-26 22:03:48下载
    积分:1
  • smdk2440 usb driver
    smdk2440 usb driver-smdk2440 usb driver
    2023-07-26 02:10:03下载
    积分:1
  • Arm7 platform based on embedded system design and development to achieve the fat...
    基于arm7平台的嵌入式系统设计开发,实现了fat32文件操作。包含原理图,代码。-Arm7 platform based on embedded system design and development to achieve the fat32 file operations. Includes schematics, code.
    2022-03-02 22:04:36下载
    积分:1
  • 基于ARM7的开发板的彩色液晶屏绘图试验程序,文件里有程序的详细注释,对与在此基础之上的二次开发非常方便...
    基于ARM7的开发板的彩色液晶屏绘图试验程序,文件里有程序的详细注释,对与在此基础之上的二次开发非常方便-based on the ARM7 development board LCD graphics testing procedures, the documents in detail the procedures Notes right and the basis of this second development is very convenient
    2022-05-29 23:42:45下载
    积分:1
  • 696518资源总数
  • 105873会员总数
  • 12今日下载