登录
首页 » SCM » 开发流程

开发流程

于 2023-04-12 发布 文件大小:6.22 MB
0 172
下载积分: 2 下载次数: 1

代码说明:

开发流程-Development process

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • pic Singlechip DB4 ~ DB7: in the role of L CD for the data lines, DB0 ~ DB2 grou...
    pic单片机 DB4~DB7:在L CD中的作用,为数据线,DB0~DB2接地,DB3接高电平以完成对液晶的初始化。本Demo例子程序中,与单片机的RB2~RB5连接,用户使用其他的管腿时,只需修改#define部分。 RS为数据、指令控制线,与单片机的RB1连接,当RS为高电平时对LCD模块数据寄存器操作,当RS为低电平时对LCD模块指令寄存器操作; E为读写使能控制线,与单片机的RA5连接,每当E线向LCD模块发送一个正脉冲,LCD模块与单片机之间将进行一次数据交换; A、K分别是LCD模块背光的正负电源引脚,1-1所示,我们将用RC2控制背光,改变R29的值将改变背光亮度 R/W为读写选择线,在ICD2DEMO教学实验板中,R/W线接地,只做对LCD模块的写操作 -pic Singlechip DB4 ~ DB7: in the role of L CD for the data lines, DB0 ~ DB2 grounding, DB3 then high in order to complete the initialization of the LCD. Examples of this Demo program, with the single chip RB2 ~ RB5 connection, the user to use other s legs, simply amend the
    2023-07-15 06:15:03下载
    积分:1
  • LT_1B msp430开发板例子程序-TA_13
    LT_1B msp430开发板例子程序-TA_13
    2022-04-26 18:16:41下载
    积分:1
  • 内容:1、用于测试的程序四
    内容:1、本程序用于测试4相步进电机常规驱动 2、需要用跳帽或者杜邦线把信号输出端和对应的步进电机信号输入端连接起来 3、速度不可以调节的过快,不然就没有力矩转动了 4、按s4(设置成独立按键模式)可以控制正反转 -Contents: 1, the procedure used to test the four-phase stepper motor-driven two conventional, need to jump cap or the signal output line of DuPont and the corresponding stepper motor signal input terminal connected three speed adjustment can not be too fast, Otherwise, there would be no moment of rotation of the four, according to s4 (set to form an independent key mode) can control the positive inversion
    2022-01-26 08:35:38下载
    积分:1
  • 使用键盘上的上、下、左、右四个按键,可以分别控制led1,2,3,4, 每个LED 对应的Port 请参考“实验平台介绍”说明文档。要求按下 上面提到的四个...
    使用键盘上的上、下、左、右四个按键,可以分别控制led1,2,3,4, 每个LED 对应的Port 请参考“实验平台介绍”说明文档。要求按下 上面提到的四个按键中间的一个按键后,该按键对应的led 被点亮,持续1 秒钟以后led 熄 灭。-Use the keyboard on the upper and lower, left, and right buttons, can control led1, 2,3,4, each LED corresponding to the Port, please refer to " experiment on" documentation. Requirements of the four above-mentioned press the middle button of a button, the button that corresponds to being light led, continuous 1 second later led out.
    2022-03-19 11:23:13下载
    积分:1
  • 电缆测试程序来测试电缆长度(300m)排序,使用抗
    网线测试仪程序,可测试网线长度(300M内),排序,用脉冲反波测试,时间*速度=距离的原理。-Cable tester program to test cable length (300M) with sorting, using anti-wave test pulse, time* speed = distance principle.
    2022-01-26 14:00:30下载
    积分:1
  • 51单片机的4层电梯控制源代码,有需要的可以参考一下
    51单片机的4层电梯控制源代码,有需要的可以参考一下-51 SCM four-layer elevator control source code, there is a need that can refer to
    2023-02-09 23:55:04下载
    积分:1
  • With the 8051 DS18B20 display is used LED, Microcontroller with AT89S52. To do t...
    用8051单片机 DS18B20显示是用LED,单片机用AT89S52. 做的温度控制系统-With the 8051 DS18B20 display is used LED, Microcontroller with AT89S52. To do temperature control system
    2023-08-09 23:25:02下载
    积分:1
  • 采用89C51采集显示8颗卫星的时间,经纬度信息
    采用89C51采集显示8颗卫星的时间,经纬度信息-Use of 89C51 collection displays eight satellites of time, latitude and longitude information
    2022-12-19 10:00:03下载
    积分:1
  • SH69PXX单片机与24系列E2PROM接口程序包
    SH69PXX单片机与24系列E2PROM接口程序包-SH69PXX microcontroller series with 24 E2PROM interface package
    2022-04-20 04:42:18下载
    积分:1
  • 开发环境:IAR EW8051 基于ZigBee/802.15.4的CC2430/CC2431 的(精简版)协议栈全部C51源代码,全面支持ZigBeeE...
    开发环境:IAR EW8051 基于ZigBee/802.15.4的CC2430/CC2431 的(精简版)协议栈全部C51源代码,全面支持ZigBeeE FFD RFD、ROUTER、COORD和多种网络拓扑
    2022-01-22 01:57:15下载
    积分:1
  • 696518资源总数
  • 106245会员总数
  • 18今日下载