登录
首页 » 嵌入式系统 » 这是一篇关于RS-485接口应用的文章

这是一篇关于RS-485接口应用的文章

于 2023-05-12 发布 文件大小:22.05 kB
0 239
下载积分: 2 下载次数: 1

代码说明:

这是一篇关于RS-485接口应用的文章- This is about the RS- 485 connections applications article

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • Protel DXP 常用库元件
    Protel DXP 常用库元件--Common-used library elements for Protel DXP.
    2022-08-09 10:47:12下载
    积分:1
  • This procedure is the routine display module, the access device for four eight l...
    本程序是显示模块的例程,所接器件为四位八段led数码管,其中PTB0-PTB3 与数码管的位选相连接,PTB4,PTB5与74LS164连接确定你开发板上拨码开 关JP1(图片上的12)的两位和JP4(图片上的9)的5、6、7、8位处于on), 而其他位处于远离on!-This procedure is the routine display module, the access device for four eight led digital tube, which PTB0-PTB3 bit digital tube and connected to the election, PTB4, PTB5 with 74LS164 sure you connect the development of on-board DIP switch JP1 ( picture on the 12) two and JP4 (picture on the 9) of 5,6,7,8 located at on), while the other located at far away from the on!
    2022-03-19 04:34:06下载
    积分:1
  • 基于VHDL的fpga设计课后程序
    周润景老师的《基于VHDL的fpga设计》的所有范例代码,可以直接使用
    2022-05-29 16:26:37下载
    积分:1
  • FDI development of the Intel Flash file system, a very powerful function
    FDI Intel开发的FLASH文件系统,功能很强大-FDI development of the Intel Flash file system, a very powerful function
    2023-07-11 13:35:04下载
    积分:1
  • STC12C32使用SIM300数据远传
    应用背景 基于GPRS网络的单片机数据传输 关键技术 使用KEILC编程语言,STC12C芯片通过SIM300C  GPRS模块进行数据远传
    2022-02-02 03:06:13下载
    积分:1
  • MS430+FM1702y读卡器程序,读写寄存器和卡.
    MS430+FM1702y读卡器程序,读写寄存器和卡.-MS430+ FM1702y reader program, reading and writing registers and cards.
    2022-02-16 08:38:40下载
    积分:1
  • 通过7路AD转换,结果存至相应存储单元
    通过7路AD转换,结果存至相应存储单元--Convert by 7 route AD, and store the result in corresponding memory.
    2022-07-14 04:23:34下载
    积分:1
  • I2C的驱动程序(包括头文件及底层的C子程序)
    I2C的驱动程序(包括头文件及底层的C子程序)-I2C drivers (including the first document and the bottom of the C subroutine)
    2022-04-22 12:55:04下载
    积分:1
  • Linux下I2C以及I2C下的键盘驱动
    Linux下I2C以及I2C下的键盘驱动-Linux I2C I2C and the keyboard
    2022-03-05 20:45:18下载
    积分:1
  • stm32串口应用程序
    这是一个用STM32库函数做的uart程序,是串口应用的基础操作,请使用KIEL进行编译,用J-link进行调试和下载,使用的几乎都是库函数,有很强的可移植性性,也可以作为其他功能操作的入门参考
    2022-02-27 00:16:35下载
    积分:1
  • 696516资源总数
  • 106908会员总数
  • 1今日下载