登录
首页 » 嵌入式系统 » 如何M68HC08,HCS08 HCS12单片机应用IIC模块

如何M68HC08,HCS08 HCS12单片机应用IIC模块

于 2023-06-14 发布 文件大小:962.82 kB
0 153
下载积分: 2 下载次数: 1

代码说明:

如何在M68HC08、HCS08和HCS12 微控制器上应用IIC模块-How to M68HC08, HCS08 and HCS12 microcontroller application IIC Module

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • 基于VHDL的AES加密算法的实现
    高级加密标准(英语:Advanced Encryption Standard 请点击左侧文件开始预览 !预览只提供20%的代码片段,完整代码需下载后查看 加载中 侵权举报
    2023-01-12 09:30:04下载
    积分:1
  • 可以在LPC2104上使用的显示的例子
    可以在LPC2104上使用的显示的例子--A display example which could be used on LPC2104.
    2022-08-16 03:18:39下载
    积分:1
  • ucGUI上的汉字子模提取工具,可将汉字库提取成ucGUI可直接使用的c文件...
    ucGUI上的汉字子模提取工具,可将汉字库提取成ucGUI可直接使用的c文件-ucGUI the Chinese Submodules extraction tool, Store can be extracted directly into ucGUI use of the c file
    2022-05-06 15:06:14下载
    积分:1
  • verilog 数字跑表 仿真源码
    1.具有暂停/启动功能;2.具有重新开始功能;3.用6个数码管分别显示百分秒、秒和分钟。 Solution:根据要求,采用自底向上的设计方法:选择了max+plus2进行编辑和调试。 整体来说分为两大部分:一部分是计数模块;另一部分是显示模块,主要运用动态扫描方式
    2022-02-21 23:36:55下载
    积分:1
  • smp8634 boot loader,smp86xx , 2.8.x.x
    smp8634 boot loader,smp86xx , 2.8-smp8634 boot loader,smp86xx , 2.8.x.x
    2022-03-20 09:56:30下载
    积分:1
  • 按键控制LED跑马灯
    通过实验掌握CC2530芯片GPIO的配置方法,掌握Led驱动电路及开关Led的原理,掌握按键的使用,实现人机交互
    2023-06-06 06:20:03下载
    积分:1
  • 简单的堆驱动程序
    一种简单的堆算法单片机和小的操作系统。创建私有堆后, 一个过程使用功能,如 MAT_HeapAlloc 和 MATMAT_HeapFree 来管理这堆中的内存。还有从专用堆分配的内存和,通过使用其他的内存分配函数分配之间没有区别。
    2023-07-23 23:50:03下载
    积分:1
  • CML公司的DE9901开发板
    应用背景The CMX990 provides, on-chip: a flexible, formattable GMSK packet and freeformat modem, a dual synthesiser fed from an external source, IF and RF transceiver stages for both Rx and Tx modes, and auxiliary ADCs and DACs for system control and monitoring.关键技术Operating in the range of 400MHz to 1GHz at data rates of 4 to 16 kbps. This single-chip, half-duplex device requires a minimum of external components, keeping end-product board size, power consumption and cost to an absolute minimum. The versatile GMSK modem is configured for either packet and freeformat data operation via an efficient task-oriented Rx and Tx format and command structure combined with data scrambling, interleaving and FEC and CRC capabilities. Rx data acquisition, extraction and tracking functions use Rx data-quality feedback to support varying signal environments. IF and RF functions in the Tx path handle all the signal processing requi
    2022-02-04 17:09:35下载
    积分:1
  • 没有翻译
    蜂鸣器驱动程序实验,电子琴程序,对单片机输入输出端口的一个小综合-failed to translate
    2022-02-20 01:25:04下载
    积分:1
  • Arduino 使用 cc2500
    收发信机的 CC2500 示例代码。这将会发送数据包中包含的长度和"你好"。每个 400ms,然后进入接收模式。 SPI 的硬件: MISO -> 12   MOSI -> 11  SCLK/SCK -> 13  CSN/SS - > 10
    2022-06-19 15:00:16下载
    积分:1
  • 696516资源总数
  • 106554会员总数
  • 12今日下载