-
对S3C4510B挂接的FLASH进行整片烧写，工具为SDT V2.51
对S3C4510B挂接的FLASH进行整片烧写，工具为SDT V2.51-right S3C4510B articulated FLASH for the entire burning, tools for SDT Watch
- 2022-12-22 20:20:03下载
- 积分：1
-
2440在ADS平台上的基础实验例程，对入门的朋友是个不错的选择...
2440在ADS平台上的基础实验例程，对入门的朋友是个不错的选择-2440 in the ADS platform, based on routine experiments, for entry-friend is a good choice
- 2023-02-19 21:30:05下载
- 积分：1
-
LPC1788-Lwip-v1.4.0
示例移植 LWIP 单片机 LPC1788
120 MHz 恩智浦LPC1788FBD208手臂皮质 M3 32微控制器 请点击左侧文件开始预览 ！预览只提供20%的代码片段，完整代码需下载后查看 加载中 侵权举报
- 2023-05-30 03:00:03下载
- 积分：1
-
x86平台的usb摄像头驱动程序，把dll文件加入到系统中就可以驱动摄像头了，芯片为ovt511的...
x86平台的usb摄像头驱动程序，把dll文件加入到系统中就可以驱动摄像头了，芯片为ovt511的-OVT511 s Driver for USB Cam on x86 platform. Just copy the DLL file to your system and drive the Cam!
- 2022-01-28 15:33:14下载
- 积分：1
-
这是一款飞利浦公司的arm芯片的设计的原理图，可以学习到arm的设计特点。...
这是一款飞利浦公司的arm芯片的设计的原理图，可以学习到arm的设计特点。-This is a Philips arm of the chip design schematics, can learn to arm design features.
- 2022-01-23 10:23:33下载
- 积分：1
-
的ARMS3C44B0自己买开发板附带的演示程序，可以运行方向。
自己买的arms3c44b0开发板附带的demo程序，可直接在ADS上跑，可供朋友们借鉴-Arms3c44b0 bought their own development board attached demo program can be run directly in the ADS for friends learn from
- 2022-02-20 11:57:50下载
- 积分：1
-
This paper introduces a system based on the LPC2000 family of processors the ini...
本文详细的介绍了基于LPC2000系列处理器的系统的初始化过程，并结合具体代码（在附带的程序中）对重映射作了细致的阐述，这些对于正确的理解和开发基于ARM的嵌入式系统具有重要的意义。-This paper introduces a system based on the LPC2000 family of processors the initialization process, combined with a specific code (in the attached program) made a detailed mapping of the re-elaboration of these for a correct understanding and development of ARM-based embedded system has an important significance.
- 2022-05-22 16:28:13下载
- 积分：1
-
试剂盒开发努里特
应用背景前言.............................................................................................................................一NURIT控制中心（努里特CC）概述......................关键技术终端被分为不同类型的硬件平台。这个词硬件平台是指所有的硬件组件和功能（即内存大小、显示类型、通讯端口、无线电类型等），终端安装在终端用户站点。当一个应用程序被下载到终端时，它的要求是检查硬件平台功能，以确保匹配的存在之间的程序要求和终端功能。
- 2022-07-09 07:16:38下载
- 积分：1
-
Samsung S3C2410 boootloader source code
Samsung S3C2410 boootloader source code
- 2022-01-25 14:54:11下载
- 积分：1
-
his project was built and tested with WinAVR
his project was built and tested with WinAVR-20060125.
Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!!
To build the code, just install WinAVR and run "make" from the console in echomaster and
echoslave subdirs.
"make program" will program the device if you have a AVRISP attached.
Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock
from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST!
Otherwise you wont get any clock signal to the AVR and then you can t program it or reset
the fuses!
The MC1319x has default clock output of 32kHz so you will have to set your programmer to
a very low frequency (
- 2023-02-22 21:55:03下载
- 积分：1
