登录
首页 » SCM » 16*16的点阵显示,包含论文电路和程序

16*16的点阵显示,包含论文电路和程序

于 2023-06-26 发布 文件大小:350.32 kB
0 990
下载积分: 2 下载次数: 1

代码说明:

16*16的点阵显示,包含论文电路和程序-16* 16 dot matrix display, contains papers circuits and procedures

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • 自已编的程序.能通过RS485总线更新单片机中的应用程序,带一程序流程图和一些说明希望能对大家有所帮助!...
    自已编的程序.能通过RS485总线更新单片机中的应用程序,带一程序流程图和一些说明希望能对大家有所帮助!-Made their own procedures. Through RS485 Bus update MCU applications with a process flow chart and some that I hope can be helpful to everyone!
    2023-08-24 02:55:03下载
    积分:1
  • S-35390A是可以在超低消耗电流、宽工作电压范围内工作的2线CMOS实时时钟IC。工作电 压为1.3 ~ 5.5 V、可适用于从主电源电压到备用电池电压的宽幅电源电压。通过0.25 μA的计 时消耗电流和宽范围的计时电源电压,可大幅度地改善电池的持续时间。在使用备用电池工 作的系统中,内置的自由寄存器可作为用户备用存储器来使用。在主电源切断前存储在寄存 器中的信息,可在电压恢复后的任何时候读出。 本产品因为内置了时钟校正功能,所以可以在很宽的范围内校正因振荡电路的频率偏差所导 致的时钟数据的提前或滞后。通过此功能和温度传感器的结合,可根据温度变化来对时钟进 行校正,从而实现不受环境温度影响的高精度的计时功能-err
    2022-03-11 19:09:40下载
    积分:1
  • small rtos的源代码。它是一款非常小巧的微内核。
    small rtos的源代码。它是一款非常小巧的微内核。-small rtos source. It is a highly compact micro-kernel.
    2022-09-29 13:10:03下载
    积分:1
  • BTF020实验程序
    BTF020实验程序-2 btf020开发板自带-Experimental procedures BTF020 development board comes with-2 btf020
    2022-04-30 03:55:20下载
    积分:1
  • 凌阳的液晶驱动 61板,大家自己看看吧
    凌阳的液晶驱动 61板,大家自己看看吧-Sunplus LCD driver 61 boards, we could see for himself now
    2023-02-23 02:35:04下载
    积分:1
  • ATMEG88 AVR 实时时钟的实现
    ATMEG88 AVR 实时时钟的实现-ATMEG88 AVR realization of real-time clock
    2022-02-06 07:34:22下载
    积分:1
  • LCD显示和单片机中断定时,单片机不断中断,通过中断计时,当一秒时间到,调用显示函数在LCD上显示时间...
    LCD显示和单片机中断定时,单片机不断中断,通过中断计时,当一秒时间到,调用显示函数在LCD上显示时间 -LCD display and single-chip timer interrupt, microcontroller constantly interrupted by interruption of time, when the second time that call functions in the LCD display to show time
    2022-03-04 18:41:54下载
    积分:1
  • 8051 in Lenov03473292 virtual serial port communications protuns
    8051 在 Lenov03473292 虚拟串口的通讯 protuns-8051 in Lenov03473292 virtual serial port communications protuns
    2022-10-23 06:20:04下载
    积分:1
  • IC Card operating software : AT88SCl604 chip mode of operation there are five. T...
    IC卡操作软件:AT88SCl604芯片的操作模式有五种。它们是通过配PGM、RST、CLK等引脚信号及内部地址计数器(IAC)的状态组合来实现。 (1) 芯片复位操作: AT88SCl604有两种复位方式:上电复位和控制复位。 上电复位: 上电复位是当芯片加电时的最初状态。上电复位属于芯片 内部复位。它将使芯片内部所有的隐含标志复位到"0"状态。并使地址计数器复位到0位。 控制复位: 当CLK为低时,在RST脚上的一个下降沿将便芯片产生复位操作。 控制复位是将地址计数器复位到0位,而不影响任何内部标志的状态。-IC Card operating software : AT88SCl604 chip mode of operation there are five. They are allocated by PGM, RST, etc. pin CLK signal and the internal address counter (IAC) portfolio of the state is to be achieved. (1) chip reset operation : reduction AT88SCl604 two ways : power-on reset and reset control. Power-on reset : power-on reset when the chip is in power at the initial state. Power-on reset the internal chip is reset. It will enable all internal chip implied signs reset to "0" state. Make address counter reset to 0. Reset control : When the CLK for the low, the RST feet of a falling edge chips will have to reset operation. Reset control is to address counter reset to 0, without prejudice to any signs of internal sta
    2022-05-28 08:23:00下载
    积分:1
  • 时钟芯片H1380控制程序,实现单片机时钟功能
    时钟芯片H1380控制程序,实现单片机时钟功能-Clock Chip H1380 control procedures, to achieve single-chip clock function
    2022-02-06 13:52:22下载
    积分:1
  • 696516资源总数
  • 106409会员总数
  • 8今日下载