登录
首页 » 嵌入式芯片 » Development board supporting Feiling OK2440V3 experimental procedure

Development board supporting Feiling OK2440V3 experimental procedure

于 2023-07-10 发布 文件大小:976.89 kB
0 111
下载积分: 2 下载次数: 1

代码说明:

飞凌OK2440V3开发板的配套实验程序-Development board supporting Feiling OK2440V3 experimental procedure

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • qnx alpu硬件通路测试代码
    本源码是用于freescale imx6系列的qnx平台,利用i2c总线接入alpu芯片,测试alpu在bypass mode模式下是否能够正常工作的代码,用于确认硬件通路是否存在问题,如果测试通过就可以利用加密库实现加密芯片的算法了。
    2022-07-16 14:35:46下载
    积分:1
  • atmel at91rm9200 driver atmel at91rm9200 driver
    基于atmel的at91rm9200的驱动, 好好东西 分享一下-atmel at91rm9200 driver atmel at91rm9200 driver
    2022-01-25 18:24:13下载
    积分:1
  • MC2410A的ADC驱动,别人写的,好像可以隔几秒自动转换一次数据...
    MC2410A的ADC驱动,别人写的,好像可以隔几秒自动转换一次数据-MC2410A the ADC driver, written by others, as if every few seconds can be automatically converted to a data
    2022-03-16 03:21:33下载
    积分:1
  • arm的非向量中断通过执行IsrIRQ判断中断源,找到相应Handle***的地址。 此程序是在arm上实现向量方中断的初始化程序...
    arm的非向量中断通过执行IsrIRQ判断中断源,找到相应Handle***的地址。 此程序是在arm上实现向量方式中断的初始化程序-arm of the non-vector interruption through the implementation IsrIRQ judgment interrupt source, find the corresponding Handle*** address. This procedure is the arm on the way to achieve vector interrupt the initialization procedures
    2023-01-05 11:55:04下载
    积分:1
  • 44B0开发板启动U
    44B0 开发板启动的 u-boot-1.2.0-0.tar.gz-44B0 development board to start u-boot-1.2.0-0.tar.gz
    2022-05-13 20:00:10下载
    积分:1
  • _ _ ARM单机TCPIP
    tcpip_mcu_arm
    2022-04-14 09:48:28下载
    积分:1
  • LOM
    LOM-ARM7的Flash烧写的windows版程序-LOM-burning ARM7 Flash version of the windows procedures
    2022-04-16 03:53:11下载
    积分:1
  • Yu Ming ARM9 embedded system design and development of curricula, the developmen...
    于明ARM9嵌入式系统设计与开发教程,开发环境是linux-Yu Ming ARM9 embedded system design and development of curricula, the development environment is linux
    2022-06-03 10:36:55下载
    积分:1
  • If you are running this example, will the PC emulation window, the first 1,2,3
    这个例子如果运行,将在仿真的PC窗口中的第1,2,3行显示一些信息后,在随机位置显示 1 ~ 5 .由于keil c51默认不支持重入函数,它的重入函数使用仿真的重入栈而不使用系统栈,而Small RTOS 51没有进行重入栈管理,所以在TaskA~TaskE虽然及其相似,但不能合并. (2)编译时会有5个警告,其中一个是因为没有使用一个系统函数OSSendSignal引起,它可以忽略.另4个是禁止任务间变量覆盖分析引起,必须忽略.感谢网友John X. Liu,在这个例子中我使用了他编写的仿真(dllPc51Emu.dll),这个dll原来是为他移植的Ucos-ii for keil c51的例子编写.-If you are running this example, will the PC emulation window, the first 1,2,3-line display some information, at random locations show " 1 " ~ " 5" . Keil c51 as the default does not support the re-entry function, which re- into the function of the weight stack instead of using the simulation using the system stack, while the Small RTOS 51 not been re-stack management, and so TaskA ~ TaskE though its similar, but not combined. (2) compile-time there will be five warnings, One of them is because there is no cause to use a system function OSSendSignal, it can be ignored. The other four are prohibited between the variables covered analyze the task to be ignored. thank User
    2022-06-19 05:01:57下载
    积分:1
  • DS1302
    DS1302时钟芯片时钟的设定及读取输出程序!-DS1302
    2022-03-21 14:27:20下载
    积分:1
  • 696516资源总数
  • 106405会员总数
  • 10今日下载