-
PMSM
成熟伺服系统的速度观测和编码器自动调零程序(Speed observation of mature servo system and automatic zero setting program)
- 2016-12-03 20:25:10下载
- 积分：1
-
SPI
使用SPI接口读写EEPROM器件W25X16系统主时钟为12M，波特率为4M(Using the SPI interface to read and write EEPROM, main clock W25X16 system 12M, the baud rate is 4M)
- 2011-07-19 12:36:10下载
- 积分：1
-
rs484zhucongtongxin
RS485主机从机通信，程序分模块变成，注释详细(RS485 master slave communication, procedures, sub-modules into a, more notes)
- 2020-06-29 17:20:02下载
- 积分：1
-
Proyecto_1
solving equation by matrix program
- 2016-11-02 01:17:58下载
- 积分：1
-
street-lamp
智能路灯的节能控制器的源码程序
用于智能路灯的节能控制(Intelligent energy saving controller for street lamp
Intelligent energy saving controller for street lamp)
- 2012-03-22 10:50:38下载
- 积分：1
-
步进电机
说明： 编制MCS-51程序使步进电机按照规定的转速和方向进行旋转，并将已转动的步数显示在数码管上。
步进电机的转速分为两档，当按下S1开关时，加速旋转，速度从10转/分加速到60转/分。当松开开关时，减速旋转，速度恢复为10转/分。当按下S2开关时，按照逆时针旋转；当松开时，按照顺时针旋转。
本程序要求使用定时器中断来实现，不准使用程序延时的方式。(The MCS-51 program is programmed to rotate the stepper motor according to the specified speed and direction, and the number of steps that have been rotated is displayed on the digital tube.
Stepper motor speed is divided into two gears. When the S1 switch is pressed, the speed is accelerated from 10 rpm to 60 rpm. When the switch is loosened, the speed will be reduced to 10 rpm. When pressing the S2 switch, rotate counterclockwise; when loosening, rotate clockwise.
This procedure requires the use of timer interrupt to achieve, do not use the way of program delay.)
- 2020-06-16 09:40:02下载
- 积分：1
-
Ex006
VS2010 C++学习（6）：ListCtrl用法及ADO方式读写Access程序(VS2010 C++ learning (6): ListCtrl Usage and Access ADO literacy program)
- 2014-04-28 17:53:25下载
- 积分：1
-
12864
说明： msp430G2驱动12864液晶显示屏显示程序(msp430G2 drive 12864 LCD display program)
- 2020-06-19 10:00:02下载
- 积分：1
-
spwm+OLED+ADC
说明： stm32发spwm波 oled显示 ADC采集(Stm32 send spwm wave oled display ADC acquisition)
- 2020-06-18 14:20:01下载
- 积分：1
-
智能温度检测控制系统设计
说明： 首先它能显示环境的温度并能设置上下限阀值，这是最基本的功能，系统上电的时候显示的是当前环境温度和设定的温度阀值，我们可以通过按键来修改温度上下限阀值。(First of all, it can display the environment temperature and set the upper and lower limit threshold, which is the most basic function. When the system is powered on, it displays the current environment temperature and the set temperature threshold. We can modify the upper and lower limit threshold by pressing the key.)
- 2021-01-23 17:30:13下载
- 积分：1
