-
rfid_test
RFID的测试程序，基于ARM9的S3C2440处理器与Linux嵌入式操作系统，代码用c编写，测试
13.56Mhz的MFRC522芯片开发的RFID读写模块的功能，卡为S50型号。(RFID testing procedures, ARM9-based S3C2440 processor and embedded Linux operating system, code using c write, test MFRC522 chip development 13.56Mhz the RFID reader module features card for S50 models.)
- 2014-10-26 15:45:48下载
- 积分：1
-
wavePlayer
使用MCU 的PWM功能进行语音播放,实现语音单段播放和循环播放！(use the MCU of PWM functionality for voice playback, the voice of single-stage play and loop!)
- 2012-08-09 14:12:25下载
- 积分：1
-
电容触摸按键实验
对电容屏进行触摸按键的编程设计，电容触摸按键程序(Programmatic design of touch button for capacitive screen, capacitive touch button program)
- 2020-06-25 04:40:02下载
- 积分：1
-
VIC_vect_eint
说明： 在周立功lpc2100上实现向量中断，随着按键的按下和放开，可实现LED的点亮熄灭。(Meritorious service in the weeks to achieve lpc210x interrupt vector, with the keys and open the press, the LED light can be extinguished)
- 2009-08-13 21:28:27下载
- 积分：1
-
STM32F407-DCMI-Camera
用STM32F407实现有摄像功能，摄像的驱动程序调试通过，配合显示屏才能显示。(With STM32F407 achieve an imaging function, camera driver debugging through, with the display to display.)
- 2021-03-29 21:59:10下载
- 积分：1
-
ARM_SPI_LCD
这是我自己写的用ARM7的SPI驱动LCD的程序
该显示屏的控制器为NT7532(This is what I wrote it myself with the ARM7 SPI-driven procedures of the LCD display controller for NT7 532)
- 2006-11-07 14:48:24下载
- 积分：1
-
摄像头OV7670 探索者+物体检测
说明： 摄像头OV7670+ 探索者stm32f407+物体检测,对图像二值化后，进行一些简单的图像处理，找出物体的边沿。(Camera OV7670 + Explorer stm32f407 + object detection, after image binarization, some simple image processing is carried out to find the edge of the object.)
- 2020-11-03 21:49:58下载
- 积分：1
-
shumaguan
ARM数字时钟，用八位数码管实现简易电子时钟的时间显示(The ARM digital clock，With eight digital realization of simple electronic tube clock time)
- 2009-09-13 20:32:35下载
- 积分：1
-
摄像头直立V1.4
说明： 摄像头两轮原理图pcb完整版大小结构都十分精确适合飞思卡尔竞赛(The size and structure of the complete PCB version of the two rounds of the camera schematic are very precise and suitable for Freescale competition)
- 2020-06-19 04:40:01下载
- 积分：1
-
M8_2400
ATMEGA8_ LTC2400 6位半表头程序
LTC2400最高测量电压为5.3V，超过5.3V或反接都会烧掉。
模拟部分供电最好经过7815稳压，最高输入电压不宜超过18V。
模拟电路与数字电路分开供电。
不要使用开关电源或PWM升压、降压电路供电
(ATMEGA8_ LTC2400 6 ½ -digit meter program LTC2400 highest measured voltage is 5.3V, 5.3V or reverse will be burned over. After 7815 some of the best analog power supply voltage, the maximum input voltage should not exceed 18V. Separate analog and digital circuit power supply. Do not use a switching power supply or PWM buck, boost circuitry)
- 2021-02-08 15:19:54下载
- 积分：1
