-
MT9v111 CMOS摄像头通过ADSP
MT9v111 CMOS摄像头通过ADSP-BF533读入并显示的汇编源程序。-MT9v111 CMOS camera through the ADSP-BF533 read into the compilation and display of source- sequence.
- 2022-01-26 02:02:15下载
- 积分:1
-
DSP28335 SCI模块
DSP28335的SCI模块 内部还包含中断 PWM模块 AD模块 中断模块 时钟模块。 实现了各个模块综合运用 能够和自己编写的上位机软件进行通信,该程序用来驱动4个电机进行闭环控制 并实时采集数据 实现指令控制
- 2023-01-30 19:15:04下载
- 积分:1
-
数字信号处理的一些方法,用C编写的,调试过,正确无误。
数字信号处理的一些方法,用C编写的,调试过,正确无误。-Some digital signal processing method, written in C, debugged, correct.
- 2022-01-25 22:30:01下载
- 积分:1
-
这是学习dsp定时器计数器的实验,通过他练习中断的概念,是初学者要做的实验之一...
这是学习dsp定时器计数器的实验,通过他练习中断的概念,是初学者要做的实验之一-This is a learning experiment dsp timer counter, through the interruption of the notion of practice, he is the one for beginners to do the experiment
- 2022-03-03 16:48:58下载
- 积分:1
-
开发环境CCS2.0
TI公司240DSP电机VVVF控制程序
可直接使用
开发环境CCS2.0
TI公司240DSP电机VVVF控制程序
可直接使用-development environment CCS2.0 TI 240DSP Motor VVVF control procedures can be used directly
- 2022-05-06 17:22:26下载
- 积分:1
-
源程序是在VisualDSP环境下开发出来的,目标处理器是4片AD公司的TS1O1 DSP。IDE_FAT32用来在硬盘上创建FAT32文件系统;2)i2c_t...
源程序是在VisualDSP环境下开发出来的,目标处理器是4片AD公司的TS1O1 DSP。IDE_FAT32用来在硬盘上创建FAT32文件系统;2)i2c_test编写IIC总线;3)codec_a_in_pal_cf_frame是加载到FLASH的程序,板子在脱离PC自动上电时会把PAL制的图像直接存到CF卡里,CF卡的文件系统是FAT16;4)codec_a_in_pal_buf_boottest是可加载的DSP图像直通程序;5)ADSP-TS101prog_driver是flash的驱动程序。-source of the VisualDSP environment developed, targeted four processor is the company"s AD TS1O1 DSP. IDE_FAT32 used in the drive to create FAT32 file system; 2) to prepare i2c_test IIC bus; 3) codec_a_in_pal_cf_frame FLASH is loading procedures, the board automatically from the PC on when power will be the PAL system images directly to CF card, the CF card is the FAT16 file system; 4) can be loaded codec_a_in_pal_buf_boottest DSP image through procedures; 5) ADSP-TS101prog_driver flash is the driver.
- 2022-06-17 21:06:54下载
- 积分:1
-
MPEG4编解C源代码,已移植到ARM和DSP上.
MPEG4编解C源代码,已移植到ARM和DSP上.-Addendum MPEG4 Solution C source code has been ported to the ARM and DSP.
- 2023-03-20 18:35:04下载
- 积分:1
-
基于DSP2812的感应电机矢量控制系统simulator程序
基于DSP2812的感应电机矢量控制系统simulator程序,其中包含cfloat和cIQmath模式。
有现成的例程和说明文档,说明文档位于doc文件夹内。
可实现有速度的感应电机矢量控制。
- 2022-03-01 18:09:07下载
- 积分:1
-
实现对JPEG图像的压缩,在DSP6000环境下的源程序
实现对JPEG图像的压缩,在DSP6000环境下的源程序-jpeg_image compressing under dsp6000
- 2022-09-12 13:25:03下载
- 积分:1
-
c语言编制的DSP硬件中断程序实验程序可在CCS中运行
c语言编制的DSP硬件中断程序实验程序可在CCS中运行-DSP hardware interrupt procedures experimental procedure can be run in the CCS
- 2022-08-17 03:33:23下载
- 积分:1