登录
首页 » 嵌入式芯片 » S3C2440 on I2C driver, has passed the test.

S3C2440 on I2C driver, has passed the test.

于 2022-07-02 发布 文件大小:2.78 kB
0 115
下载积分: 2 下载次数: 1

代码说明:

S3C2440上的I2C驱动程序,已经通过测试。-S3C2440 on I2C driver, has passed the test.

下载说明:请别用迅雷下载,失败请重下,重下不扣分!

发表评论

0 个回复

  • Basis (3). Rar
    uclinux讲座之(三).rar-Basis (3). Rar
    2022-01-25 20:13:26下载
    积分:1
  • AT91SAM9261的USB设备驱动程序,开发板为客户现场设备…
    AT91SAM9261的USB设备驱动程序,开发板作为场上自定义设备和主机通信,同时提供了diverstudio开发的windows下主机端应用程序-AT91SAM9261 the USB device drivers, development board as a custom field devices and host communications, while providing diverstudio developed windows applications under the Host
    2022-01-30 13:06:09下载
    积分:1
  • 命令行的sjf2410工具,可用于2410平台下的flash烧写。 注意:这个版本与其他版本的不同之处在于:它可以设置并口地址,方便在使用PCI转并口时使用...
    命令行的sjf2410工具,可用于2410平台下的flash烧写。 注意:这个版本与其他版本的不同之处在于:它可以设置并口地址,方便在使用PCI转并口时使用; 它可以自动安装giveio驱动,简化操作,更傻瓜,更方便-Sjf2410 command-line tool can be used under the 2410 platform flash programmer. Note: this version with other versions of the difference is: it can set the parallel port address, to facilitate the use of PCI to the use of parallel port it can automatically install giveio drive to streamline the operation, but a fool, more convenient
    2022-03-18 07:54:18下载
    积分:1
  • his project was built and tested with WinAVR
    his project was built and tested with WinAVR-20060125. Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!! To build the code, just install WinAVR and run "make" from the console in echomaster and echoslave subdirs. "make program" will program the device if you have a AVRISP attached. Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST! Otherwise you wont get any clock signal to the AVR and then you can t program it or reset the fuses! The MC1319x has default clock output of 32kHz so you will have to set your programmer to a very low frequency (
    2023-02-22 21:55:03下载
    积分:1
  • Boot code for ARM
    Boot code for ARM-720T, ARM-920T, XScale, SA1100 and EPXA-Boot code for the ARM-720T ARM-920T, XScale, SA1100 and EPXA
    2022-08-17 18:11:56下载
    积分:1
  • timer,ARM 定时中断,蒂娜是萨皮肤活泼感公共课gjgk
    timer,ARM 定时中断,蒂娜是萨皮肤活泼感公共课gjgk-timer, ARM timer interrupt, Cantoni Savimbi skin is a lively sense of public courses gjgk
    2022-06-17 15:19:29下载
    积分:1
  • STM32F405RGT6作为主控的演示程序
    资源描述RoboModule-STM32F405RGT6作为主控的演示程序
    2022-07-03 08:47:07下载
    积分:1
  • arm 4510 原理图
    arm 4510 原理图-arm diagram 4510
    2022-11-10 21:55:03下载
    积分:1
  • 系统中的串口通讯程序
    嵌入式系统中的串口通讯程序-Embedded System Serial Communication Program
    2022-01-25 14:14:05下载
    积分:1
  • 端点批量传输 eerom的读写 固件自动下载 USB标准请求 GPIF单字节读写 GPIF_FIFO读写 Led显示与键盘扫描等...
    端点批量传输 eerom的读写 固件自动下载 USB标准请求 GPIF单字节读写 GPIF_FIFO读写 Led显示与键盘扫描等-Bulk transfer endpoint eerom automatically download the firmware to read and write USB standard GPIF single-byte read and write requests to read and write GPIF_FIFO scan Led display and keyboard, etc.
    2023-06-17 14:20:06下载
    积分:1
  • 696518资源总数
  • 105873会员总数
  • 12今日下载