-
STM32 开发板例子:SVC.
开发环境:Keil For ARM
STM32 开发板例子:SVC.
开发环境:Keil For ARM-STM32 development board example: SVC. Development Environment: Keil For ARM
- 2022-08-10 20:51:07下载
- 积分：1
-
Led Pattern Control. Controls multiple leds with 7 differenet blink patterns
Led Pattern Control. Controls multiple leds with 7 differenet blink patterns
- 2022-02-13 08:22:23下载
- 积分：1
-
关于电力系统FFT谐波检测存在问题的研究
关于电力系统FFT谐波检测存在问题的研究-FFT on the power system harmonic detection research questions exist
- 2022-03-26 05:30:50下载
- 积分：1
-
LPC1788 UART
该示例是 USB 到串口 （UART0） 为 LPC1788。
本示例描述如何在 LPC177x_8x 上使用 UART 接口。
- 2023-08-14 16:15:03下载
- 积分：1
-
arm 存储管理系统mmu的中文翻译版本，学习arm的可以看看的
arm 存储管理系统mmu的中文翻译版本，学习arm的可以看看的-arm MMU memory management system of the Chinese translation version of the study can look at the arm of the
- 2023-06-12 13:30:03下载
- 积分：1
-
在ARM中的ADS软件实现一个滤波器，教学使用
在ARM中的ADS软件实现一个滤波器，教学使用-At ARM" s ADS software implementation of a filter, teaching the use of
- 2022-03-02 01:41:22下载
- 积分：1
-
例如嵌入式硬件平台仿真软件的源代码，，SOF…
模拟嵌入式硬件平台的软件源代码，例如arm内核的软件模拟，一些arm开发板的软件模拟-embedded hardware platform simulation software source code, for example, the software arm-core simulation, some arm development board simulation software
- 2022-05-15 20:54:21下载
- 积分：1
-
周立功的文件系统，在用文件系统的时候非常好用，大家一起研究吧，是个不错的程序...
周立功的文件系统，在用文件系统的时候非常好用，大家一起研究吧，是个不错的程序-Ligong weeks of the file system, file system with a very good time, let us explore together, be a good procedure
- 2022-01-28 03:09:11下载
- 积分：1
-
用c51驱动fm1702sl，相应的成功实现之后…
用c51驱动fm1702sl，经过调试成功的实现相应功能，适合利用fm1702sl开发相关产品人员参考、利用。-C51 driver with fm1702sl, after the successful realization of the corresponding debug function for use of the development of related products fm1702sl reference, the use of.
- 2022-04-13 08:13:10下载
- 积分：1
-
his project was built and tested with WinAVR
his project was built and tested with WinAVR-20060125.
Make sure the MCU target define in the Makefiles corresponds to the AVR you are using!!
To build the code, just install WinAVR and run "make" from the console in echomaster and
echoslave subdirs.
"make program" will program the device if you have a AVRISP attached.
Remember to set the AVR device to at least 8MHz. The AVR may use the programmable clock
from MC1319x, just remember to check if the MC1319x and SPI communication is working FIRST!
Otherwise you wont get any clock signal to the AVR and then you can t program it or reset
the fuses!
The MC1319x has default clock output of 32kHz so you will have to set your programmer to
a very low frequency (
- 2023-02-22 21:55:03下载
- 积分：1
