-
TI TMPS430单片机使用例子，希望对象我一样的初学者有帮助
TI TMPS430单片机使用例子，希望对象我一样的初学者有帮助-a sample of using the TMPS430,i hope it will help the new learner as me
- 2022-05-06 00:27:41下载
- 积分：1
-
是液晶显示屏的驱动程序，很好的啊
是液晶显示屏的驱动程序，很好的啊-LCD display driver, very good ah
- 2022-09-23 20:00:03下载
- 积分：1
-
优龙2410板子的BIOS代码，程序清晰明朗，容易移植到类似的开发板上，十分值得推荐。...
优龙2410板子的BIOS代码，程序清晰明朗，容易移植到类似的开发板上，十分值得推荐。-2410 Liuzhou excellent board of BIOS code, the program clearly uncertain, easily transplanted to a similar development on the board, very much worth recommending.
- 2022-02-28 11:36:49下载
- 积分：1
-
从官方网站获得的CanOpen通讯协议的全部资料，已经按照内容更改文件名，这是最全的协议了...
从官方网站获得的CanOpen通讯协议的全部资料，已经按照内容更改文件名，这是最全的协议了-Obtained from the official website of the All CanOpen communications protocol has been changed in accordance with the contents of the file name, which is most of the protocol
- 2022-06-19 22:15:47下载
- 积分：1
-
红外遥控接收
ORG 0000H
LJMP START 转入主程序
ORG 0010H
START:
MAIN:
JNB P2...
红外遥控接收
ORG 0000H
LJMP START 转入主程序
ORG 0010H
START:
MAIN:
JNB P2.2,IR
LJMP MAIN
以下为进入P3.2脚外部中断子程序，也就是解码程序
IR:
MOV R6,#9
SB:
ACALL DELAY882 调用882微秒延时子程序
JB P2.2,EXIT 延时882微秒后判断P3.2脚是否出现高电平如果有就退出解码程序
DJNZ R6, SB 重复10次，目的是检测在8820微秒内如果出现高电-infrared remote control receiver ORG 0000H LJMP START into main program ORG 0010H START : MAIN : JNB P2.2, IR LJMP MAIN below to enter P3.2 foot external interrupt subroutine, which is decoding procedures IR : MOV R6, SB# 9 : Calling ACALL DELAY882 882 microsecond delay subroutine JB P2.2, EXIT 882 microsecond delay after the judgment whether there P3.2 feet to I quit if decoding procedures DJNZ R6, SB repeated 10 times, the purpose is to test if within 8,820 microsecond high
- 2022-07-21 10:12:11下载
- 积分：1
-
51单片机串口通讯程序
51单片机串口通讯程序-51 monolithic integrated circuit string mouth communication
procedure
- 2022-01-22 17:51:11下载
- 积分：1
-
基于 51 的倒车雷达
基于 51 的倒车雷达-turned 51 on the radar
- 2022-01-27 22:42:45下载
- 积分：1
-
_MCS
_MCS-51单片机实用子程序库_MCS-51 single-chip utility subroutine library-_MCS-51 single-chip utility subroutine library
- 2022-08-26 08:38:51下载
- 积分：1
-
计算机简单控制由软件和硬件组成。软件由Visual Basic 6.0编写。硬件主要由无线发送模块和单片机（C语言编写）构成。通过RS232界面与PC通信而实现...
计算机简单控制由软件和硬件组成。软件由Visual Basic 6.0编写。硬件主要由无线发送模块和单片机（C语言编写）构成。通过RS232界面与PC通信而实现无线控制系统。
主要功能是：通过遥控器连接PC机的"上下左右"按键 ,当电脑界面处于powerpoint界面下,能通过遥控器控制幻灯片的上下切换.
-Simple control by the computer software and hardware components. Software prepared by the Visual Basic 6.0. Hardware mainly by the wireless sending module and single chip (C language) constitute. Through the RS232 communication interface with the PC wireless control system. Main function is to: Connect PC through a remote control machine up and down about button, when the computer interface in a powerpoint interface via remote control to switch slides up and down.
- 2023-08-17 08:55:03下载
- 积分：1
-
步进电机速度控制，根据要求设计步进电机速度曲线
步进电机速度控制，根据要求设计步进电机速度曲线-Stepper motor speed control, according to design stepper motor speed curve
- 2023-06-11 01:30:04下载
- 积分：1
