-
基于fpga的SPI接口实现
本工程是基于Altera Cyclone系列的FPGA来实现的SPI接口，使用Verilog代码编写，能够进行 8位、 16位 、 32位数据传输的可选操作。
- 2023-04-02 17:15:05下载
- 积分：1
-
picorv32-master
PicoRV32 is a CPU core that implements the RISC-V RV32IMC Instruction Set. It can be configured as RV32E, RV32I, RV32IC, RV32IM, or RV32IMC core, and optionally contains a built-in interrupt controller.
Tools (gcc, binutils, etc..) can be obtained via the RISC-V Website. The examples bundled with PicoRV32 expect various RV32 toolchains to be installed in /opt/riscv32i[m][c]. See the build instructions below for details.
- 2020-06-24 21:40:01下载
- 积分：1
-
TCON
用verilog编程的TCON模块（时序控制器）的程序(Verilog programming module with TCON (timing controller) program)
- 2013-06-26 10:50:59下载
- 积分：1
-
sobel
由Verilog编写在FPGA实现sobel算法应用于图像边缘检测，工程文件可在quartus13.1以上版本打开；工程使用到ram、fifo、pll三种ip核，design文件夹下包含ram、fifo、vga控制以及串口收发和sobel算法模块，sim和doc文件夹下分别包含modelsim的仿真模块和仿真结果；测试时将200*200分辨率的图片用matlab文件夹下的matlab脚本压缩、二值化，再将生成文件中数据用串口发给FPGA，边缘检测结果会通过VGA输出。(Written by Verilog in the FPGA implementation sobel algorithm applied to the edge detection of the image, the project file can be opened in the quartus13.1 or later project use ram, fifo, pll three ip kernel, design folder contains ram, fifo, vga control and Serial port transceiver and sobel algorithm module, sim and doc folder, respectively, include modelsim simulation module and simulation results test will be 200* 200 resolution picture matlab folder under the matlab script compression, binarization, and then generated Data in the file with the serial port to the FPGA, edge detection results will be output through the VGA.)
- 2021-01-15 21:08:46下载
- 积分：1
-
FPGA-DSP
vhdl编写的FPGA与DSP接口程序，在FPGA内分配了两块双BUFFER与DSP进行通信(vhdl prepared FPGA and DSP interface program, the FPGA within the allocated 2 pairs of BUFFER to communicate with the DSP)
- 2021-01-08 10:58:51下载
- 积分：1
-
Verilog實現32筆資料奇偶归并排序
资源描述透過Verilog來實現奇偶归并排序壓縮檔中包括4 8 16 32筆資料的排序、、、oe_sort_32為32筆資料排序網絡oem_32為32筆資料排序模組
- 2023-01-25 06:20:04下载
- 积分：1
-
Labview-Data-acquisition-card-
基于labview的数据采集系统，包括示波器和函数信号发生器，可以实现简单数据采集.(Labview-based data acquisition system, including oscilloscopes and function signal generator, can achieve a simple data acquisition.)
- 2014-01-15 21:26:04下载
- 积分：1
-
74ls165
74ls165电路源代码verilog,已经验证。(74ls165 verilog)
- 2020-11-22 22:59:34下载
- 积分：1
-
13.3_Tracing
基于System Generator的图像处理工程,多媒体处理FPGA实现的源码,基于视频的运动跟踪(System Generator based image processing engineering, multimedia processing on FPGA source, video-based motion tracking)
- 2020-11-04 17:39:51下载
- 积分：1
-
速率发生器
这个程序是用来划分时钟，实现9600个传输速率的。该代码是在10兆赫的时钟频率运行。它计算特定的传输速率所需的比特数；
- 2022-08-22 03:09:34下载
- 积分：1
