-
m5441x
support for Coldfire m5441x processors.
- 2014-09-19 16:13:50下载
- 积分：1
-
bianyuanjiance
图像采集 VGA输出 图像的边缘 ov7670(V image acquisition VGA output image edge)
- 2020-06-21 13:20:06下载
- 积分：1
-
VGA_test
vga很好的学习材料，测试程序，欢迎下载(vga good learning materials, testing procedures, please download)
- 2010-08-17 22:32:45下载
- 积分：1
-
VHDLRS232Slave
本模块的功能是验证实现和PC机进行基本的串口通信的功能。需要在PC机上安装一个串口调试工具来验证程序的功能。程序实现了一个收发一帧10个bit（即无奇偶校验位）的串口控
//制器，10个bit是1位起始位，8个数据位，1个结束
//位。串口的波特律由程序中定义的div_par参数决定，更改该参数可以实
//现相应的波特率。程序当前设定的div_par 的值是0x145，对应的波特率是
//9600。用一个8倍波特率的时钟将发送或接受每一位bit的周期时间
//划分为8个时隙以使通信同步.
//程序的工作过程是：串口处于全双工工作状态，按动key1，FPGA向PC发送“21 EDA"
//字符串（串口调试工具设成按ASCII码接受方式）；PC可随时向FPGA发送0-F的十六进制
//数据，FPGA接受后显示在7段数码管上。
//视频教程适合我们21EDA电子的所有学习板(this is a base vhdl for uart progarm.)
- 2013-08-22 10:42:06下载
- 积分：1
-
APB 总线
APB 总线。可以实现单个数据在总机与从机之间的读写功能(This can achieve the read and write functions of a single data between the master and the slave .)
- 2017-08-22 16:04:06下载
- 积分：1
-
8位十六进制频率计设计 根据频率的定义和频率测量的基本原理，测定信号的频率必须有一个脉宽为1s的输入信号脉冲计数允许信号；1s计数结束后，计数值被锁入锁存器，计...
8位十六进制频率计设计 根据频率的定义和频率测量的基本原理，测定信号的频率必须有一个脉宽为1s的输入信号脉冲计数允许信号；1s计数结束后，计数值被锁入锁存器，计数器清零，为下一测频计数周期做好准备。测频控制信号可由一个独立的发生器（FTCTRL）来产生。-8-bit hexadecimal Cymometer designed in accordance with the definition of frequency and frequency of the basic principles of measurement to determine the frequency of the signal must have a pulse width of the input signal for 1s permit pulse counting signal 1s counting after the total value was locked into the lock depositors, counters cleared for the next count cycle frequency measurement ready. Frequency control signal generator may be an independent (FTCTRL) to generate.
- 2022-06-19 17:20:21下载
- 积分：1
-
raylrnb (3)
说明： 本资源有一个matlab程序段，是仿真BPSK分别在高斯噪声和瑞利衰落下的误码率，产生图形对仿真值和理论值进行比较(This resource has a matlab program segment, which is the bit error rate of simulated BPSK under Gaussian noise and Rayleigh fading respectively. The generated graph compares the simulated value with the theoretical value.)
- 2019-10-21 21:16:04下载
- 积分：1
-
This document gives the code for programming a CC2500 transceiver using Altera S...
This document gives the code for programming a CC2500 transceiver using Altera Stratix FPGA. The FPGA and CC2500 are connected through SPI mode with the FPGA as the master and CC2500 as the slave.
- 2022-02-26 15:59:21下载
- 积分：1
-
adc0809的fpga时序电路接口程序
adc0809的fpga时序电路接口程序-Sequential Circuits adc0809 the FPGA interface program
- 2022-01-25 21:49:43下载
- 积分：1
-
VHDL-Handbook.pdf
VHDL Handbook by HARDI Electronics AB
- 2015-02-17 17:50:32下载
- 积分：1
